| General Purpose |
 |
General Purpose Blades are recommended for cutting of most pre-cast concrete products and building materials such as;
Concrete / Aggregated concrete / Roof tile / Red brick / Block / Engineering brick / Concrete pipe / Slab / other less abrasive building products.
Quality Level : Economy, Standard, Premium
Available Diameter : From 4"(105mm) to 20" (500mm)
Available Segment Height : 0.28" (7mm) / 0.39" (10mm)
|
|
| |
| Stone |
 |
Granite and Marble blades are recommended for the cutting of following products;
Granite / Marble / Very dense concrete / Hard engineering bricks / Hard clay pipes / Hard natural stone / Other very hard, non-abrasive materials
Quality Level : Standard, Premium, Professional
Available Diameter : From 4"(105mm) to 24" (600mm)
Available Segment Height : 0.28" (7mm) / 0.39" (10mm) / 0.47"(12mm)
|
|
| |
| Silent Core Blade |
 |
Silent Blades give professional cutting for granite and marble but reduces noise.
Laser cutting core
Quality Level : Premium, Professional
Available Diameter : From 9"(230mm) to 24" (600mm)
Available Segment Height : 0.378"(9mm) / 0.39" (10mm) / 0.47"(12mm) / 0.59"(15mm)
Wet Only
|
|
| |
| Normal Concrete |
 |
Concrete cutting blades are recommended for the cutting of most types of concrete products, such as;
Soft concrete / Medium concrete / Cured concrete / Reinforced concrete / Medium to hard brick / Hard natural stone / Most pre-cast concrete product
Quality Level : Economy, Standard, Premium
Available Diameter : From 4"(105mm) to 24" (600mm)
Available Segment Height : Thickness : 0.28" (7mm) / 0.39" (10mm)
|
|
| |
| Reinforced Concrete |
 |
This high quality segmented blade provides the highest cutting performance on reinforced concrete especially at peak efficiency.
Quality Level : Standard, Premium, Professional
Available Diameter : From 4"(105mm) to 24" (600mm)
Available Segment Height : Thickness : 0.28" (7mm) / 0.39" (10mm)
|
|
| |
| Green Concrete |
 |
This high quality segmented blade provides the highest cutting performance at peak efficiency on green concrete (8~24hrs / 24~48hrs).
Quality Level : Standard, Premium, Professional
Available Diameter : From 4"(105mm) to 24" (600mm)
Available Segment Height : Thickness : 0.28" (7mm) / 0.39" (10mm)
|
|
| |
| Asphalt |
 |
Asphalt blades are recommended for the cutting of following products;
Footway asphalt / carriageway asphalt / Very abrasive hot rolled asphalt / asphalt over concrete / Very abrasive block / Green concrete
Quality Level : Standard, Premium, Professional
Available Diameter : From 9"(230mm) to 24" (600mm)
Available Segment Height : 0.28" (7mm) / 0.39" (10mm)
|
|
| Undercutting Protection type |
| Tungsten Carbide tip |
Deep segment |
Drop segment |
 |
 |
 |
|
| |
| Tuck Point Blade |
 |
recommended for mortal, expansion joints, slotting granite.
Quality Level : Economy, Standard, Premium
Available Diameter : From 4"(105mm) to 10" (250mm)
Available Segment Height : 0.28" (7mm) / 0.39" (10mm)
Available Segment Thickness : 4.5mm / 6.4mm / 9.5mm
|
|
| |
| Crack Chaser |
 |
Dry, clean cutting and routing. Leaves V-shaped pattern for filling.
Use on popular right angle grinders for crack chasing on concrete and most building materials
Quality Level : Premium
Available Diameter : From 4"(105mm) to 7" (180mm)
Available Segment Height : 10mm / 12mm / 15mm
Available Segment Thickness : 6.5mm / 9.5mm / 12mm
|
|
| |
| Wall Chaser |
 |
Quality Level : Premium
Available Diameter : From 4"(105mm) to 9" (230mm)
Available Segment Height : 0.28" (7mm) / 0.39" (10mm)
|
|
| |
| Diameter(mm) |
Length(mm) |
Thickness(mm) |
Width(mm) |
Number of Slot |
| 105 |
32 |
2.0 / 2.2 |
7 / 10 |
8 |
| 115 |
32 |
2.0 / 2.2 |
7 / 10 |
9 |
| 125 |
32 |
2.0 / 2.2 |
7 / 10 |
10 |
| 140 |
32 |
2.0 / 2.2 |
7 / 10 |
10 |
| 150 |
32 |
2.0 / 2.2 |
7 / 10 |
12 |
| 180 |
32 |
2.0 / 2.2 |
7 / 10 |
14 |
| 200 |
32 / 38 |
2.4 |
7 / 10 |
14 / 16 |
| 230 |
32 / 38 |
2.4 / 3.0 |
7 / 10 |
16 / 18 |
| 250 |
32 / 38 |
2.4 |
7 / 10 |
18 / 20 |
| 300 |
40 / 50 |
2.8 / 3.2 |
7 / 10 |
20 / 16 |
| 350 |
40 / 50 |
2.8 / 3.2 |
7 / 10 |
23 / 19 |
| 400 |
40 / 50 |
2.8 / 3.2 |
7 / 10 |
27 / 22 |
| 450 |
40 / 50 |
3.2 |
7 / 10 |
30 / 25 |
| 500 |
40 / 50 |
4.0 / 4.2 |
7 / 10 |
33 / 27 |
| 550 |
40 / 50 |
4.0 / 4.2 |
7 / 10 |
37 / 31 |
| 600 |
40 / 50 |
4.0 / 4.2 |
7 / 10 |
40 / 35 |
|
